Product ID:235B1642, BAR RUST 235 MULTI PURPOSE EPOXY
MSDS Date:04/23/1991
FSC:8010
NIIN:00N033227
MSDS Number: BPLXF

DEVOE COATINGS CO

4000 DUPONT CIRCLE
LOUISVILLE, KY 40207
US

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 502-897-9861

Cage: 1HK86

DEVOE COATINGS CO

7600 LOUISVILLE, KY 40207-4802 US

Telephone: 502-897-9861

Cage: 1HK86

MSHA APPRVD RESPIRATOR WHEN FLAME CUTTING, WELDING,

RTECS: 9999999ZZ

STDS IN MIX/APPLIC/CURING AREAS & TO REMOVE SANDING

RTECS: 9999999ZZ

FLAME CUTTING ON SURFS COATED W/PROD. VAPS MAY

RTECS: 9999999ZZ

VAPORS FROM LOWER LEVELS OF WORK AREA. ELIMINATE

RTECS: 9999999ZZ

TALC (POWDER), CONTAINING NO ASBESTOS FIBERS; (MAGNESIUM

CAS: 14807-96-6

RTECS: WW2700000

Fraction By Weight: 25%

OSHA PEL 2 MG/M3 RDUST

ACGIH TLV: 2 MG/M3 RDUST

2.14.

CAS: 110-43-0

RTECS: MJ5075000

Fraction By Weight: <5%

OSHA PEL 100 PPM

ACGIH TLV: 50 PPM

SILICATE, MICA; (MICA)

CAS: 12001-26-2

RTECS: VV8760000

Fraction By Weight: 10%

OSHA PEL 20 MPPCF

ACGIH TLV: 3 MG/M3 RDUST; 9293

4.2.

CAS: 71-36-3

RTECS: EO1400000

Fraction By Weight: 5%

OSHA PEL 100 PPM

ACGIH TLV: S, C 50 PPM; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

3

Fraction By Weight: <5%

TITANIUM OXIDE; (TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 5%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

288.18 G/L.

RTECS: 9999999VO

MOLECULAR WEIGHT ORGANIC FRAGMENTS.

RTECS: 9999999ZZ

CONSULT PHYS IMMED.DO NOT INDUCE VOMIT.ASPIR

RTECS: 9999999ZZ

INTENTIONAL MISUSE BY DELIB CONC & INHALING

RTECS: 9999999ZZ

AND NON-SPARKING TOOLS. STORE IN CLOSED

RTECS: 9999999ZZ

OF A TWO COMPONENT PROD,THEN MIX OF

RTECS: 9999999ZZ

PROD MAY CONTAIN CHEM KNOWN

RTECS: 9999999ZZ

OR OTHER REPRODUCTIVE HARM (PROPOSITION 65).

RTECS: 9999999ZZ

IN RESTRICTED VENT AREAS, WEAR NIOSH/MSHA APPRVD

RTECS: 9999999ZZ

PARTICULATES & VAP,WHEN USED IN CONFINED AREAS,WEAR

RTECS: 9999999ZZ

SILICA GEL; (CRYSTALLINE SILICA)

CAS: 112945-52-5

RTECS: VV7310000

Fraction By Weight: <.5%

EPOXY RESIN

CAS: 25068-38-6

RTECS: KC2100000

Fraction By Weight: 20%

10.

CAS: 64742-95-6

Fraction By Weight: 10%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM

HYDROCARBON RESIN

Fraction By Weight: 10%

IRON (III) OXIDE; (IRON OXIDE)

CAS: 1309-37-1

RTECS: NO7400000

Fraction By Weight: <5%

OSHA PEL 10 MG/M3 (FE)

ACGIH TLV: 5 MG/M3(FE),B2; 9293

LD50 LC50 Mixture:SEE INGREDIENTS.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHAL: IRRITATION OF
RESPIRATORY TRACT; HEADACHE, NAUSEA, DIZZINESS, WEAKNESS & FATIGUE.
EXTREME EXPOSURE CAN RESULT IN UNCONSCIOUSNESS AND EVEN RESPIRATORY
ARREST. MAY CAUSE ALLERGIC REACTION. OVEREXPOSURE MAY CAUSE PERM
LUNG DMG. SKIN/EYE: CAUSES EYE AND SKIN IRRIT, NAUSEA, VOMITING &
DIARR. (EFTS OF OVEREXP)
Explanation of Carcinogenicity:SILICA, CRYSTALLINE: CLASS 2A (IARC).
Effects of Overexposure:HLTH HAZ: CHRONIC: REPORTS HAVE ASSOCIATED RPTD
AND PRLNGD OCCUPATIONAL OVEREXP TO SOLV W/PERM BRAIN AND NERVOUS
SYSTEM DAMAGE. PROLONGED OR REPEATED BREATHING OF SPRAY MIST AND/OR
SANDING DUST OVER P ERIOD OF YEARS MAY CAUSE DUST DISEASE OF LUNGS.
INTENTIONAL MISUSE BY DELIB CONC & INHAL CONTENTS MAY BE
HARMFUL/FATAL.
Medical Cond Aggravated by Exposure:NONE, WHEN USED IN ACCORDANCE WITH
SAFE HANDLING AND USE INFORMATION.

First Aid:INHAL: IF YOU EXPERIENCE DFCLTY IN BRTHG, LEAVE AREA TO
OBTAIN FRESH AIR. IF CONTINUED DFCLTY IS EXPERIENCED, SUMMON MED
ASSIST IMMED. IF BRTHG CEASES, RESTORE USING APPRVD CPR TECHNIQUES
& SUMMON MED HELP IMMED. EYES: FLUSH IMMED W/LRG AMTS OF H*2O FOR
AT LST 15 MIN. GET MED ASSIST. SKIN: WASH AFFECTED AREAS W/SOAP &
H*2O. REMOVE SOILED CLTHG. GET MED ASSIST IF IRRIT PERSISTS.
INGEST: (ING 14)

Flash Point:100F,38C
Lower Limits:1%
Extinguishing Media:USE CO*2, DRY CHEMICAL, FOAM, OR OTHER NFPA
APPROVED METHOD FOR TREATING CLASS B FIRE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT
EQUIP.SUMMON PROFESSIONAL FIREFIGHTERS. H*2O SPRAY MAY BE INEFT.IF
H*2O USED,FOG NOZ PREF.IF EXPOS TO FIRE(SUPDAT)
Unusual Fire/Explosion Hazard:KEEP CNTNRS TIGHTLY CLSD.ISOLATE FROM
HEAT,ELEC EQUIP,SPARKS & FLAME.DUE TO PRESS BUILDUP,CLSD CNTNRS
EXPOS TO EXTREME HEAT MAY EXPLO.NEVER USE WELDING/(SUPDAT)

Spill Release Procedures:REMOVE ALL SOURCES OF IGNIT (FLAMES, HOT
SURFS,& ELEC,STATIC/FRICTIONAL SPARKS). PVNT BRTHG OF VAPS. VENT
AREA. BEFORE ATTEMPTING CLEAN-UP, REFER TO HAZ CAUTION INFORMATIONS
IN OTHER SEC OF MSDS. CONT AIN SPILLED MATL & REMOVE W/INERT ABSORB
(ING 16)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARKS AND FLAME.
DO NOT SMOKE. PREVENT BUILDUP OF VAPORS BY MAINTAINING CONTINUOUS
FLOW OF FRESH AIR.
Other Precautions:DO NOT STORE ABOVE 120F/NEAR FIRE/OPEN FLAME. STORE
LRG QTYS IN BUILDINGS TO COMPLY W/OSHA 1910.106. KEEP CNTNR CLSD
WHEN NOT IN USE. DO NOT TRANSFER CONTENTS TO BOTTLES/OTHER UNLBLD
CNTNRS.DO NOT REU SE EMPTY CNTNRS.IF MATL IS PART (ING 17)

Respiratory Protection:DO NOT BRTH VAPS, SPRAY MIST/SANDING DUST. WHEN
SPRAY APPLIED IN OUTDOOR/OPEN AREAS, & DURING SANDING/GRINDING OPER
USE NIOSH/MSHA APPRVD MECH FILTER RESP TO REMOVE SOLID AIRBORNE
PARTICLES OF OVERSPR AY & SANDING DUST. WHEN USED (ING 20)
Ventilation:PROVIDE GEN DILUTION/LOC EXHST VENT IN VOL & PATTERN TO
KEEP AIR CONTAM CONC BELOW CURRENT APPLIC SAFETY & HLTH (ING 23)
Protective Gloves:SOLVENT IMPERMEABLE GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:DO NOT GET ON SKIN. SOLV IMPERMEABLE
CLOTHING AND BOOTS TO PREVENT SKIN CONTACT ARE RECOMMENDED.
Work Hygienic Practices:REMOVE AND WASH SOILED CLOTHING BEFORE REUSE.
WASH HANDS BEFORE EATING OR SMOKING.
Supplemental Safety and Health
FIRE FIGHT PROC: /EXTREME HEAT,H*2O SHD BE USED TO COOL CLSD
CNTNRS/PVNT PRESS BUILDUP/POSS AUTOIGNIT. EXPLO HAZ:CUTTING TORCH
ON/NEAR CNTNR (EVEN EMPTY) AS PROD/ITS RESIDUE MAY IGNITE.DURING
EMER CND TNS OVEREXP TO DECOMP PRODS MAY CAUSE HLTH HAZ.SYMP MAY
NOT BE IMMED APPARENT.OBTAIN MED ATTN.PART #:COATING BUFF BASE.

Boiling Pt:B.P. Text:244F,118C
Vapor Pres:SEE INGRED
Vapor Density:HVR/AIR
Spec Gravity:1.4256
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:34.16

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY CAUSE TOX FUMES WHEN HEATED TO
DECOMP. FUMES MAY CONTAIN CO, CO*2, PHENOL DERIVATIVES, TRACES OF
TDI, & LOW (ING 13)

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS. INCINERATE ONLY IN APPROVED FACILITY. DO NOT
INCINERATE CLOSED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.